UL633N通用级的激光

光谱精密激光UL633N通用激光

The Spectra Precision UL633N is the unique construction laser allowing total automatic control of all three axes (X/Y/Z). Control of the Z axis is accomplished through the new "fan beam" technology, while control of the X and Y axis utilizes a dual radio connection.

所有的惠民诀窍精密光谱中，UL633N适合用于生产一个方便，快捷，准确的工作的所有应用程序。

The universal laser can provide precise automatic axes alignments to two desired points without positioning the receivers 90 degrees perpendicular. This allows contractors to perform easily dual axis alignments for applications such as grade work on sports fields, parking lots, tennis courts and driveways. Since the UL633N can work with two receivers simultaneously, contractors can measure an unknown grade value automatically between two elevation points in Grade Match mode.

在这里需要最高的精度和稳定性，如机场跑道的工地，高度可精确使用自动双轴PlaneLok功能保护。这种能力锁和保持激光基准面到放置在现有的高程点，消除了漂移或造成振动或温度变化可能出现的错误两个接收机。

The UL633N is also the first laser where the plumb beam can be changed into a rotating fan beam which can be detected by the new SpotFinder SF 601. The UL633N can align the plumb beam automatically to the SpotFinder. Measuring a grade value through an existing pipe or an open trench can also be done quickly and easily in automatic Spot Match mode. The UL633N and the Spot Finder offer additional versatility for 90 degree layout applications on concrete pads as well as indoors for drywalls. Activating the SpotLok mode ensures the UL633N locks and holds the plumb beam automatically to the Spot Finder at the desired direction or elevation point offering a precise alignment to avoid rework.

UL633N包括一个全功能结合广播and infrared remote control RC603N, with a built-in back-lit intuitive graphic display. Contractors can do everything with the remote control that they can do at the laser keypad, up to 150 m (490 ft) away from the laser -even from the cab of a machine. The ability to make grade changes remotely can significantly reduce setup time and speed operations.

With its rugged design, the UL633N can survive a drop of up to 1 meter (3 feet) on concrete. The laser also features IP67 moisture and dust sealing to handle the tough construction environment.

The UL633N Universal Laser retains all well accept functions of the GL500 series lasers with additional advanced features and benefits offering much more versatilities.

特征

• 自动电子自流平提供快速，方便横向水平，档次，铅垂设置
• Large compensated grade range from -25% to +25%
• 快速设置与组合的无线电/红外遥控为水平，垂直和级应用控制
• 电子水准测量振动滤波器可以降低振动典型地经历了高的三脚架，在强风，或在高振动的工地。
• No rework due to automatic temperature and grade- and cross axis compensation
• 双自动轴对齐做精确的自动轴比对以两个期望对准点不定位接收机90°垂直（上Y和X轴+/- 40°对准范围）
• 水平角测量能力提供通过在Y-或X-轴线的两个轴线对准来测量两点之间的角度的机会
• 自动点对齐。的SF601引导光束快速，准确到在水平轴上的目标点，而Z轴级值将被保持
• 现货搜索使用现货查找SF601手动查找垂直光束的中心
• 单和双级匹配（Y-轴和x轴分别或同时）和点匹配（Z轴）测量并显示现有的等级超过未知地面并消除耗时且易于出错的计算，所花费的时间搜索级计划，并通过挖掘
• Single and Dual PlaneLok (Y- and X-axis separate or at the same time) and Spot Lok (Z-axis) automatically locks on to an existing elevation or vertical alignment point which eliminates all drift or possibility of error due to improper calibration or weather
• Very rugged, survives a 1 m (3 ft) drop on concrete and reduces service and repair costs
• 蒙版模式消除了在现场的其他人员干扰
• 不同的旋转速度（连续可调），加上扫描模式提供更多的价值，并确保室内还现场的​​要求会得到满足

应用

• General construction leveling such as forms, footers and pads
• 具体为临界说明书的精确放置面长距离，并用激光控制刮板（自动PlaneLok）
• 无漂移总体结构垂直取向和垂直于地脚螺栓安装，加形式，倾斜向上和幕墙管道（自动PlaneLok）
• Dual slope grading and steep slope excavating
• Slope work for sports fields, driveways, ramps and parking garages
• 内政部建筑 - 墙面的布置和安装吊顶的