激光水平ADA CUBE 2-360终极版

激光水平ADA CUBE 2-360终极版

激光Lavel ADA CUBE 2-360基本版

激光Lavel ADA CUBE 2-360基本版

Elevating Tripod For Line Lasers

Elevating Tripod For Line Lasers

激光水平ADA CUBE 2-360终极版

激光水平ADA CUBE 2-360is a measurement equipment that will be appreciated by professional and private users due to its functions.

£227.00
In stock
SKU
CUBE2-360R

由于特殊发射极仪器伸出360度水平梁。路沿石铺设或其它涂料时,墙纸等,是在建设和维修工程的理想仪器。

Convenient marking.Laser level projects 360° horizontal line and 360° vertical line. There is no need to rotate the instrument when making horizontal marking. Just place ADA Cube 2-360 on the selected height. Horizontal beam will be along the perimeter. There is a 90° projection (laser cross) when switching on the vertical line. It is very convenient to shift dots, for example, from one wall to another. It is possible to switch off laser lines one-by-one. Just select the one line that you need for a work.

Accurate levelling.Auto self-leveling. ADA CUBE 2-360 differs in high accuracy – the error is just 0,3 mm/m.

Receiver mode.There is a receiver mode for outdoor operation under bright light. The range of the marking increases from 20 to 70m.

Two places of attachment.It is possible to place ADA CUBE 2-360 on the tripod or attach to the wall mount due to the thread 1/4". One thread is located on the back part of the instrument, another is on the bottom.

TILT operation.It is possible to incline instrument at any angle working in this mode. Just lock the pendulum setting the switch on button in the middle position. Laser beams will be projected with required inclination. This function is used, for example, when setting stair railings.

受保护的房屋。The whole housing of ADA CUBE 2-360 is protected from all sides. Rubber parts protect the instrument against damages during falls and hits.

Wall mounting.The metal angle bracket with magnets and 5/8″ thread allows fixing the line laser on any surface. Due to the special notch it is possible to hang the clamp on the drywall screw.

Elevating tripod.Light aluminum support with sliding column for installation at the height from 35 up to 110 cm. The elevating detail is used for smooth adjustment of the height in the range of 25 cm. The tripod provides for quick installation of the level at the required height in any place.

Laser glasses. Required for improving the laser ray visibility, especially when the laser ray is badly visible (e.g. under bright daylight).

Plastic case.Hard plastic case for convenient storage and transportation of the whole set. Everything is at hand.

  • Specifications
Laser projection 1 h (360°) 1 v (360°)
Working range 20 m / 70 m (with receiver)
准确性 ± 0,3 mm/m
激光二极管 类2,635纳米,<1个MWT
防尘/防水保护 IP 54
Power supply 3个电池АА/ 1.5伏
Tripod thread 1/4"
Dimensions 95х95х65 mm
Weight 0,39公斤

  • What's included
Laser level
Case
Laser glasses
Universal fixing
Support
Batteries
Instruction